WJA
18-08-2010, 06:21 AM
FTXD50JVEA / RXD50JVEA.
Won't run. H6 fault code. No residual output current from compressor, which u would expect even if at fault.
Daikin say replace PCB, compressor and fan.
Is it possible to diagnose more accurately, as customer rightly points out, thats like your garage telling u to replace the engine, gearbox and wiring loom and that will fix your car. So would buying a new one.
Daikin adamant that all three components must be replaced, but interestingly customer had a similar problem just before the warranty expired, and only the PCB was replaced.
Any assistance / comments appreciated.
AJ
Won't run. H6 fault code. No residual output current from compressor, which u would expect even if at fault.
Daikin say replace PCB, compressor and fan.
Is it possible to diagnose more accurately, as customer rightly points out, thats like your garage telling u to replace the engine, gearbox and wiring loom and that will fix your car. So would buying a new one.
Daikin adamant that all three components must be replaced, but interestingly customer had a similar problem just before the warranty expired, and only the PCB was replaced.
Any assistance / comments appreciated.
AJ