View Full Version : Shop manual for c201 Isuzu
KM275
17-08-2010, 03:15 AM
I'm looking for a shop manual for a c201 from thermo king unit
looking to rebuild this engine i've been using in a generator for the last 2 years i don't know what unit it came out
any help on a manual would be great
blaine.p
24-08-2010, 09:28 PM
Super NWD 30 around 1979
KM275
25-08-2010, 12:31 PM
Ok does anyone have shop manual for a NWD30 unit
abbsnowman
25-08-2010, 06:14 PM
I may be wrong but I don't believe that is available in PDF form. Maybe a wire diagram but thats about it. They really didn't have computer based books back then.
cadwaladr
26-08-2010, 01:10 AM
did some research into a c201 years ago while rebuildihg one was yold that the original bore size mirrored an old [gasoline] engine made by isuzu,found it very difficult to find torque settings had to go via tk dealer,isuzu did not want to talk/help with this engine ,but found a very similar engine in a forklift truck?.
clivemtk
26-08-2010, 09:27 PM
try a bedford rascal van
blaine.p
26-08-2010, 11:44 PM
Ok does anyone have shop manual for a NWD30 unit
Yes I have one. I sent you a message with my phone number.
blaine.p
26-08-2010, 11:45 PM
Yes I have one. I sent you a message with my phone number.
It is a Overhaul Manual for a C201
KM275
06-09-2010, 09:10 PM
I found one on ebay and got it so i'm good
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.