md2 thermoking

[tnk]

Hi Guys, i am new to this site, and appreciate all the help and advise, i have a thermoking md2 reefer, i have no power with the on/off switch, i do have constant power to the positive terminal on the reefer, this unit hasn't ran in years, any help would be greatly appreciated.

[malkiaizrod]

First measure accumulator
next main supply of unit right side 2 and 2A pins
starter 12V-pins, generator 12V pin,
all cable 2 are power supply. it goes on emergency switch( push button).

[tnk]

Thanks, so i have main power goining to the right side of the, power on both sides of the fusible link, i do have powre on the 2a on the circuit board and thats it, i can't get the fuel pump/pre heat or start to energize, when i turn on the switch nothing happens, it has the controll box on bottom and on the reefer, do you have email? thanks for your help

[abbsnowman]

If you are in BC Canada, send me a pm mark@futureclimates.ca