ThePenguin
26-07-2010, 03:43 AM
Hi - sorry if I posted this in the wrong forum, if the mods need to move it - that's fine.
I co-own a Manitowoc E400 (air cooled) ice machine with a neighbor. Recently it stopped working for unknown reason.
Neighbor thought it was the "start relay" (bolted inside back cover of machine) - so he tried to replace it.
except that he did not mark the wires and now we can't get it to work.
the previous owner had the machine wired to be used with a timer - so that is not helping in my attempt to get the machine going again. The timer wires are spliced in at a couple of places in the machine. I have a manual, but with the timer wires it makes following the wiring diagram difficult.
anyone familiar with this machine that could help me figure out what wires go where?
Thanks!
I co-own a Manitowoc E400 (air cooled) ice machine with a neighbor. Recently it stopped working for unknown reason.
Neighbor thought it was the "start relay" (bolted inside back cover of machine) - so he tried to replace it.
except that he did not mark the wires and now we can't get it to work.
the previous owner had the machine wired to be used with a timer - so that is not helping in my attempt to get the machine going again. The timer wires are spliced in at a couple of places in the machine. I have a manual, but with the timer wires it makes following the wiring diagram difficult.
anyone familiar with this machine that could help me figure out what wires go where?
Thanks!