NorthSeaTech
24-07-2010, 03:28 AM
Gents,
I have a problem with a mitsubishi unit
Outdoor unit: Mitsubishi SCM45ZG-S
Indoor unit: Mitsubishi SKM45ZG-S (two off)
The problem is that the unit was faulty and after investigation and subsequent fault finding it was narrowed down to either a blockage or no refrigerant.
The blockage appeared to be cleared and the unit then ran for a further 2-3 weeks before the client then reported the unit in fault again. They claim the unit was fine up to a day or two before it stopped working where it started to blow warm air.
Im thinking it may have developed another blockage....any ideas on what may be causing this?
The unit runs R410A?
TIA
I have a problem with a mitsubishi unit
Outdoor unit: Mitsubishi SCM45ZG-S
Indoor unit: Mitsubishi SKM45ZG-S (two off)
The problem is that the unit was faulty and after investigation and subsequent fault finding it was narrowed down to either a blockage or no refrigerant.
The blockage appeared to be cleared and the unit then ran for a further 2-3 weeks before the client then reported the unit in fault again. They claim the unit was fine up to a day or two before it stopped working where it started to blow warm air.
Im thinking it may have developed another blockage....any ideas on what may be causing this?
The unit runs R410A?
TIA