RDM Controllers

[matt.yelland]

Hiya all,

I was just having a look on the RDM website, but cant find any info on either the PRO100 controller or the PRO123 which replaces it.

Does anybody have any info / parameter setpoints on the controllers please?

Many thanks

Matt

[coolhibby1875]

hi Matt, i'm not very good at showing links and stuff but i have checked there site and its defo there, i will check again and try and suss out how to post a link!

[matt.yelland]

Hiya mate....

I found it, after much searching!!!!! Only the PRO123, not the PRO100..... Would be great if you could let me know if its in there....

Many thanks

[Tayters]

For the PR0123 try
http://www.resourcedm.com/docs/ML%20Controller%20User%20Guide.pdf

Couldn't find the PR0100 but I think most of this infomation should get you by.

Cheers,

Andy.

Edit:
Looks like you found it as I did. Must be getting slow in me old age.

[Colin G]

is that the one with the relay board?

[Mark]

Hiya all,

I was just having a look on the RDM website, but cant find any info on either the PRO100 controller or the PRO123 which replaces it.

Does anybody have any info / parameter setpoints on the controllers please?

Many thanks

Matt

Matt, is this TCG.

Compressor Relay Sticking?.

[matt.yelland]

Hiya Mark....


It was, quite old now, but thanks. Got sent back to RDM. Hope things are good

[kevmass]

the pro123 suppeseedes the pro100 i have had to upgrade a few of em the settings are the same but if you want it to comunicate with the rdm front end you need to order a ml comms module (just like the ones you get in M & S)

[Blueboy]

call Charlie at RDM - He the Man

[Mark]

call Charlie at RDM - He the Man

Do not need to. There had been issues on a number of integral cases with the compressor relay sticking on the controller.Which where captured, were sent back under warranty.