moswald
21-06-2010, 04:46 PM
Hello,
I am currently using a phase change CPU cooling system.
My current compressor and condenser is good for about 250 watts.
I am upgrading CPU's to a setup that will require upwards of 500 watts of cooling (possibly more).
I also want to run a 220v-240v compressor for power consumption reasons.
I was thinking about this setup:
Danfoss SC12G
A new 17" x 16" condenser and 12v fan from a BMW e36.
I figure my condenser should be able to shed up to 1500 watts.
This compressor says r143a, but is there a better choice?
Am I on the right track?
Suggestions?
Thanks!
I am currently using a phase change CPU cooling system.
My current compressor and condenser is good for about 250 watts.
I am upgrading CPU's to a setup that will require upwards of 500 watts of cooling (possibly more).
I also want to run a 220v-240v compressor for power consumption reasons.
I was thinking about this setup:
Danfoss SC12G
A new 17" x 16" condenser and 12v fan from a BMW e36.
I figure my condenser should be able to shed up to 1500 watts.
This compressor says r143a, but is there a better choice?
Am I on the right track?
Suggestions?
Thanks!