View Full Version : polar T316 ice maker
doormaster2008
16-06-2010, 04:15 PM
hi guys.has anyone any experiance working on these machines.looked at one today.when it fills the tray with water the weight drops the tray partway down.do i need a complete tray assembly.similar to the icematics only this is more or less all plastic.thanks
B G Scott
16-06-2010, 04:28 PM
Bests go to the Nisbets web site they sell these machines and stock the parts.
nisbets.com
tel 0845 1405555
Graham86
16-06-2010, 07:21 PM
Had this problem a couple of weeks ago, its either play between the halldrive and motor or play on the motor shaft, if its the motor it will need replacing but if its the halldrive just drill the pin out and put a small screw in and everything should tighted up. hope this helps
doormaster2008
16-06-2010, 08:34 PM
thanks for the help guys.will have a look tomorrow.thanks again
Graham86
20-06-2010, 01:56 PM
didnt mean the halldrive ment the Motor Connecting Axis, got mixed up
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.