Fujitsu A0U24CL

[markkstrn]

Hi All,

Does anyone have an installation manual for the above titled unit? I am more interested in the electrical wiring of the indoor/outdoor units.

I am not getting power to the indoor/outdoor units at all. There are no lights, fans nothing. I wasn't the original installer however I do have my refer license and am familiar with other non-split units.

[bigor_2]

Unfortunately, such model is not familiar to me. However ...
I hope that power supplies on unit are submitted;)
In a normal state all LED's outdoor PCB is OFF. LED's flashing if unit is in error mode. Check PCB outdoor. For this purpose is power supply OFF -> remove one thermistor or all thermistors from socket (CN11, CN12,CN13) -> power supply ON -> if LED's flashing is half good, if NO - PCB It is defective.

[ozairman]

Are you sure that is the correct model number??
I have access to wiring diagrams for ASU24CL / AOU24CL and that model is an inverter type machine. Looking at your picture the product looks more like a fixed speed compressor unit and by the looks of it much larger capacity than 24k BTU's say 30,0000 BTU or more if it has two condenser fans.

[Makeit go Right]

Hi All,

Does anyone have an installation manual for the above titled unit?
Try: http://www.fgeurofred.co.uk/default.asp?docId=12663

[Brian_UK]

Good link, thanks.

The wiring diagrams for most split units are on the inside of the casing panels.

[nike123]

There is AOU24D1, AOU24RLX, AOU24RLM, AOU24RLM1
It is not known to me AOU24CL.