View Full Version : york s7 compressor / motor alignments
road31
07-06-2010, 04:53 PM
Can any one tell me how to get a procedure for alignment of the motor and compressor, I think you have to do a slight misalignment for thermal growth. not sure, any info would be great
Thanks
road31
07-06-2010, 04:59 PM
This is a 1000 ton york screw chiller
Gingerair
07-06-2010, 05:17 PM
For proceedure try-
http://www.reliabilitydirect.com/alignmentproducts/Dial%20Indicator%20Procedure.htm
You'll have to check with the manufacturer for any required thermal growth values, otherwise align couplings, run unit to achieve operating temp then re-check alignment, compare with cold values & make adjustments if you feel necessary..
bigsk
27-07-2010, 03:38 AM
i remember its capacity is 1052 ton
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.