PDA

View Full Version : help needed



ranger178
29-05-2010, 08:40 AM
Hi all, hope you can help me?
I have a fridge freezer that only required a defrost heater and 2 new door gaskets, fitted those parts now only half the evaporator freezes up.
i flushed the system and found that there was alot of oil mixed with the flushing liquad, fitted a new drier and recharged the unit (134a), after 2 days the same thing happens again , only half the evaporator freezes up, could the compressor be faulty?

bob007
29-05-2010, 03:33 PM
have you checked it for leaks?
is it reaching temp?
are the door seals correct?

ranger178
29-05-2010, 06:01 PM
yip gaskets ok
no leaks
temp in freezer -18 and 9 in fridge