PDA

View Full Version : Water FCU suggestions?



Makeit go Right
28-05-2010, 05:57 PM
We have an aircon enquiry with no chances for a condenser. However, chilled water mains are available, with capped off valves, ready for use.

Not my preferred medium, since many years. But, can anyone suggest the equivalent of a 3.5kW high wall FCU, one that I can serve with this mains chilled water? Ideally a FCU with included control valve & stat etc, so that I would just pipe up to it and switch on.

dannycool
28-05-2010, 06:13 PM
I know Quartz Airking make a 2/4 pipe hi-wall unit, not sure if you can buy direct or through a supplier.
They are not the best looking things though.

I believe ICS are supplying Climaventa hi-wall units, i've never seen them though, so cant comment on the looks or quality.

Danny

By the way if you do go ahead, when your hanging these things, bear in mind they will be full of water, so you will need some beefy fixings!

eggs
28-05-2010, 08:30 PM
Heronhill (http://www.heronhill.co.uk/productdetails.cfm?prodID=CWM) do the Quartz Airking as mentioned above. It looks like 5.7kw is the smallest though.

We looked at using them a while ago, but found a duct route to suite the Hitachi centrifugal condensing unit instead.

Eggs

nike123
29-05-2010, 07:44 AM
http://www.icsheatpumps.co.uk/docs/MIC%2030-60.pdf

http://www.galletti.it/famiglia.php?tipo=2&idfam=8

http://www.hekia.fr/images/stories/PDF/doc_technique/hekia_doctech_ventiloconvecteur.pdf

http://www.sabiana.it/en/product/product_detail.asp?IDProductCategory=12&IDProduct=55

http://www.technibel.com/lang_uk/unite_ter-site/muraux.html

http://www.aermec.com/en-en/prodotti/default.asp?id=133&ftype=fancoil&sun=fcw

http://www.aermec.com/en-en/prodotti/default.asp?id=133&ftype=fancoil&sun=fcw2

http://www.cosmogas.com/html/page_2_AGUASPLIT.html

http://www.ferroli.it/condizionamento/industriale/fcp-20-40/en?begin=&ln=eNpLtDK0qs60MrAutrKwUjIzMLA0tDA2VLKuBQBV5gZH