View Full Version : MTA air drier
chemi-cool
12-05-2010, 05:24 PM
I am looking for the manual of Marco polo air drier model 5MP1600 and controller parameter's list.
Controller is Dixell IC121C.
Thank you guys.
Brian_UK
12-05-2010, 07:40 PM
Can't find an IC121 but found an XT 121, same thing??
http://www.dixell.com/linea58/download/XT120-121C-D_GB.pdf
or try Dixell download site?
http://www.dixell.com/home/eng/
(You may need to register)
chemi-cool
12-05-2010, 08:04 PM
Thanks brian,
The controller is OEM, special parametrs for MTA.
I could not find the way to change them.
Brian_UK
12-05-2010, 08:07 PM
The controller is OEM, special parametrs for MTA.
They just have to make themselves unique. :(
chemi-cool
12-05-2010, 08:13 PM
Apparently, Dixell is connected somehow to MTA, all the controllers have different functions.
If I cant find the papers I will put a different controller with a timer for the condensed water.
It only means to rewire the control board.
glenn1340
13-05-2010, 07:29 PM
Apparently, Dixell is connected somehow to MTA, all the controllers have different functions.
If I cant find the papers I will put a different controller with a timer for the condensed water.
It only means to rewire the control board.
I installed a MTA drier earlier this year and I handed the manual into my office, if I can retrieve it I`ll email you a copy.
If you do fit a replacement controller you can always fit a timed solenoid condensate drain instead having to find a controller to enable the use of the original drain.
Regards,
Glenn
chemi-cool
13-05-2010, 07:57 PM
Thanks very much.
I will leave you my email in PM.
1torr
14-05-2010, 10:31 PM
pass codes 4, 32, 69?
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.