alexcj
23-04-2010, 07:51 AM
Hi everyone! I am trying to replace defrost timer on my Beko CDA543F. The old one literally burn down after defrost hose at the top section become and water was dripping into the box. I have ordered new one, tested as advised on various sites and trying to connect. Am I right to understand that wiring on the fridge are as follows: red-line, black-compressor, white-common, yellow-heater? I have tried to connect in that order but it does't seem to have any effect. For a time been I have wired together red and black to make compressor run and manually switching off fridge 2-3 times a day. What do I miss?