youbendem
15-04-2010, 09:24 AM
I have a sanyo 3 compressor vrf unit running on 407
The h07 fault is a low compressor oil fault
Upon checking the charge on the system it seemed that there has been a small loss of refrigerant so I added 1.5kg of gas
I have also added 0.5ltr of oil
There are no signs of leakage
I have thought of changing the sensor
any ideas
The h07 fault is a low compressor oil fault
Upon checking the charge on the system it seemed that there has been a small loss of refrigerant so I added 1.5kg of gas
I have also added 0.5ltr of oil
There are no signs of leakage
I have thought of changing the sensor
any ideas