View Full Version : Delta - RA of Haverhill
Pingo
14-04-2010, 03:59 PM
Hello everyone
I need to replace a R22 system manufactured by RA of Haverhill England.
It seems the company no longer exists.
The indoor unit is a VAH50 PE in a computer room
and the outdoor system which is a ducted type of unit is a Delta 5CU 050.
Does anyone know the cooling capacity of this old R22 system?
regards pingo
Brian_UK
14-04-2010, 09:26 PM
Try checking the duty of the expansion valve.
multisync
14-04-2010, 09:50 PM
Try checking the duty of the expansion valve.
Compressor data would be better
hyperion
15-04-2010, 09:52 AM
You could contact Heronhill, http://www.heronhill.co.uk/
they may have some of the original reference literature for this unit.
Pingo
15-04-2010, 08:24 PM
Thanks to hyperion ,multi and Brian for the replies to my question,
I will try heronhill to see if they have anything in there archives.
also when i am back on site i will get access to the compressor to see the model rating.
I guess from the condensing unit model number it will be a 5ton cooling system.
thanks pingo
multisync
15-04-2010, 09:55 PM
Thanks to hyperion ,multi and Brian for the replies to my question,
I will try heronhill to see if they have anything in there archives.
also when i am back on site i will get access to the compressor to see the model rating.
I guess from the condensing unit model number it will be a 5ton cooling system.
thanks pingo
The 050 may allude to 50k btu?
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.