Mr Slim Service Handbook

[Tayters]

Was looking for the Mitsi R2 dip switch settings to keep in my van for reference. Haven't found them yet but came across the Mr Slim Service Handbook which might be helpful for some.

Happy reading,

Tayters.

http://www.mrslim.com/UploadedFiles/Resource/PUY-PUZ-A12~42%20Service%20Manual%20OC367C%206-27-07.pdf

[Tayters]

Cut out the middleman.
Find them all here, but if someone has just a list of the dip switch settings for trouble shooting I'd be grateful for a copy.

Cheers.

http://www.mrslim.com/CustomerCare/resourcesDetail.asp

[frank]

If only you had taken the time to look at all the information contained within the link you posted, you would find the answer you seek..........
http://www.mrslim.com/UploadedFiles/Resource/PURY-P72-240Y%28T%29%28S%29HMU_Service_Manual_HWE0803A_12-02-08.pdf page 125

Why do some people always want others to do the legwork??:(

[Tayters]

If only you had taken the time to look at all the information contained within the link you posted, you would find the answer you seek..........
http://www.mrslim.com/UploadedFiles/Resource/PURY-P72-240Y%28T%29%28S%29HMU_Service_Manual_HWE0803A_12-02-08.pdf page 125

Why do some people always want others to do the legwork??:(


Easy big guy. I did look through it but couldn't find the particular piece I was after.

The settings I refer to I've seen in an R2 training manual. There were a few pages and you could get info such as high/low pressures and thermister temps as seen by the outdoor board
I've used such info on a city multi once to check high side pressure after the relevant code was generated.

[Brian_UK]

Or looking on the forum found this recent thread, any help?

http://www.refrigeration-engineer.com/forums/showthread.php?t=24266

[Thermatech]

The data dip switch settings on the outdoor board will depend on which model City Multi.
All the dip settings for data display on the outdoor unit circuit board are in the back of the service manual.

All service manuals for current & older models are available from the Mitsubishi UK website so you can download whatever manuals you need.

With Mr Slim current model all operating data available from remote controller via engineer mode settings. Again all settings are in the back of the service manual.

[Tayters]

Cheers Chaps,

I see them under the Request Code List.

Many Thanks.