View Full Version : Stal Mini screws
Magoo
06-04-2010, 02:10 AM
Looking for capacity information on Stal S24 and a R59, both on R22, at -30'C/ +35'C. 2 pole motors 50Hz.
Magoo
modvalve
06-04-2010, 07:51 PM
ring the friendly staff at Johnson Controls 09 444 6434 I'm sure they will be able to help:D
Grizzly
06-04-2010, 10:09 PM
Sorry I cannot be more Helpful.
All I have is this small page of Technical Info on the S24.
See attached Page.
Grizzly
Josip
07-04-2010, 10:53 AM
Hi, Magoo :)
Looking for capacity information on Stal S24 and a R59, both on R22, at -30'C/ +35'C. 2 pole motors 50Hz.
Magoo
Hope this will help ....
Best regards, Josip :)
evapcoil1
10-05-2010, 12:04 PM
Magoo, had you find what you were looking for? If not , I might be able to help you....
Rizzdogg
29-06-2010, 09:38 AM
Hey am looking for some info on the stal s24, does anyone know what "low pressure ratio" is calculating! Having alarm issues.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.