PDA

View Full Version : Dynamic modeling and Simulation program







josei
04-04-2010, 11:17 PM
CoolPack is a collection of simulation models for refrigeration systems. The models each
have a specific purpose e.g. cycle analysis, dimensioning of main components, energy
analysis and -optimization.

The following page contains links to software developed
at ME department at Tech.Denmark University. Click Coolpack.exe link in the following page:
http://j.mp/Coolpack-1-48

Dowload software and read more about the following simulation purposes:


Calculation of refrigerant properties (property plots, thermodynamic & thermophysical
data, refrigerant comparisons)
Cycle analysis e.g. comparison of one- and two-stage cycles
System dimensioning calculation of component sizes from general dimensioning
criteria
System simulation calculation of operating conditions in a system with known
components
Evaluation of operation evaluation of system efficiency and suggestions for reducing
the energy consumption
Component calculations calculation of component efficiencies
Transient simulation of cooling of an object e.g. for evaluation of cooling down
periods
:cool:PACK

nike123
05-04-2010, 03:41 AM
OK, What is new from 2000 year?

desA
05-04-2010, 05:13 AM
Actually, Coolpack 1.48 is available from the developer's site.

http://www.ipu.dk/English/IPU-Manufacturing/Refrigeration-and-energy-technology/Downloads/CoolPack.aspx

nike123
05-04-2010, 09:26 AM
Good find DesA. I did not knew it was updated.

desA
05-04-2010, 09:29 AM
It's a pleasure. :D

josei
05-04-2010, 03:58 PM
Actually, Coolpack 1.48 is available from the developer's site.

http://www.ipu.dk/English/IPU-Manufacturing/Refrigeration-and-energy-technology/Downloads/CoolPack.aspx

The Power of Now
Updated Thank You desA

Josei :cool:

desA
05-04-2010, 03:59 PM
A pleasure... :D

Peter_1
05-04-2010, 05:59 PM
What are the additional features you discovered desA?

Brian_UK
05-04-2010, 07:26 PM
From above link...
"Originally, it was programmed in Pascal but the present release is updated to Delphi. So far we have included one transient element: simulation of the cooling of an object with the possibility of applying an on/off control of the compressor."

Peter_1
05-04-2010, 07:30 PM
I never ran this feature on Coolpack and I even don't know why it can be used practically. Too many variables are unknown - at least for me- or uncertain and the way you stock an item in a coldroom is extremely important t o find the cool-down time. Or how the flow pattern over the product is also such a factor difficult to calculate.
If we need a calculation to cool or freeze something down within a given time, we always test it in a real life situation with a lot of loggers all over the place and in the product.

desA
06-04-2010, 04:00 AM
What are the additional features you discovered desA?

So far, no change - based on the parts I use. Many of these run off the EES engine, anyway.