PDA

View Full Version : Roll Bonded Evaporator



Vicky
24-02-2005, 02:19 PM
I am being told by manufacturer that a roll bonded evaporator which was pressure tested by one of our engineers should not be pressure tested as it is too fragile. As I am not technically trained and work in the office can someone tell me how this should be leak tested?

Thanks

Vicky

chemi-cool
24-02-2005, 02:57 PM
It is a bit risky for the evaporator but if you do not exceed 4 bar, it should be ok.

Chemi :)