tyrrell6w
07-03-2010, 06:10 AM
good day to you all
where having some problems using a icad 900 with a icm65
\we use it for defrosting our plate freezers on board an dutch frezing trawler
now the problem we are have is
it seem the valve is not opening quickly
when we give the valve some pre opening its going oke for several times
then over a period of time (approx 1 hour)
The pre opening is disserpearing
and the valve or icad seem to be to late to open again
we trided re callibrating
checked all the setting
everyting seem to be in order
after recalibration the vale works fine by th way
but after approx 1 hour the malfuntion begins again
the valve is in a co2 system
hope somone can help me
berst regards jack eelman
where having some problems using a icad 900 with a icm65
\we use it for defrosting our plate freezers on board an dutch frezing trawler
now the problem we are have is
it seem the valve is not opening quickly
when we give the valve some pre opening its going oke for several times
then over a period of time (approx 1 hour)
The pre opening is disserpearing
and the valve or icad seem to be to late to open again
we trided re callibrating
checked all the setting
everyting seem to be in order
after recalibration the vale works fine by th way
but after approx 1 hour the malfuntion begins again
the valve is in a co2 system
hope somone can help me
berst regards jack eelman