PDA

View Full Version : Nox



Reeferjon
17-02-2005, 09:13 PM
So Guys.
Speedy rocket man here needs a valve to control the NOX used to provide an oxidiser to power his amature rockets :D .

I need to find a 1/4 valve preferably flare (needs to be light'ish (typical 1/4 HGS 8w coil size).
It needs to have an MOPD of at least 1500PSI and run from 12v or lower.

Prof any idea's most of the Sporlan range finish at 500PSI with MOPD of 350ish.

chemi-cool
17-02-2005, 09:31 PM
Try SV for hydraulic.
They work in this range. I dont know about the connections but flare will not hold that pressure.

Chemi :)

Reeferjon
17-02-2005, 09:42 PM
thanks, just had a quick search, all v big valve in hydrolic range.

Reeferjon
24-02-2005, 09:17 AM
Also need a pressure relief valve rated at about 140 Bar but nice and light.

chemi-cool
24-02-2005, 02:53 PM
Try this page,
http://valves.globalspec.com/SpecSearch/Suppliers/Flow_Control_Flow_Transfer/Valves/Back_Pressure_Pressure_Relief_Valves?SrchItem=1

Nice is in the eyes of the beholder ;)

At this range, it will not be made from aluminum.

Are you building an airplain? :D

Chemi :)

Reeferjon
25-02-2005, 11:00 AM
Its an amature hybrid rocket motor, the oxidizer is provided by the NOX.