View Full Version : Refrigeration for Fishing Ships
jepoy_02
19-02-2010, 03:34 AM
Hi everyone,
Does anyone have any guidelines for refrigeration systems for fishing ships? I need to design one that has a brine freezer and a couple of storage rooms, but I am not sure about the considerations needed for this.
Appreciate all your help!
Lawrence
Toosh
19-02-2010, 06:33 AM
Hi everyone,
Does anyone have any guidelines for refrigeration systems for fishing ships? I need to design one that has a brine freezer and a couple of storage rooms, but I am not sure about the considerations needed for this.
Appreciate all your help!
Lawrence
Hi Lawrence, have a look at this
http://www.matsu.alaska.edu/documents/RH_Fishing_Boat_Refrig.pdf
Toosh
jepoy_02
24-02-2010, 06:03 AM
Hi Toosh,
Thanks for the reply. Although I need to find actual design procedures for to calculate for the components required.
Appreciate the help!
Lawrence
D.D.KORANNE
25-02-2010, 09:59 AM
Specify design parameters .
You will need
a) see water cooled condenser
b) compressor which can be used on marine application , due consideration for constant rolling-pitching action
c) electrical system which is suitable for marine weather
d) refrigeration piping should be preferably elect welded / gas welded ; avoid threaded joints .
E) water cooled condenser to be with cupro-nickel (70:30)
f) paint : Marine grade
details can be worked out after load conditions are finalized .
Give further details .
charlie n
25-02-2010, 12:39 PM
BIG suction traps.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.