PDA

View Full Version : slide valve modification


salamander
11-02-2010, 05:53 AM
Does anyone have good drawings for modifying Mycom slide valves to change vi. Have 200, 250, and 320 that need to be 2.6.
RANGER1
13-02-2010, 10:10 PM
salamander ,
Mycom should be able to supply this to you no problem , especially if you buy spares off them .

Both slide valve and discharge end housing port have to be modified .

From what Vi are you converting from out of interest and why ?
Nh34life
15-02-2010, 04:13 AM
what are your running specs i got a chart in the car i could tell you what port to run, or with a bit of effort i can send the info via fax?
salamander
19-02-2010, 05:21 AM
I got the numbers for all but the 320. Customer is changing to thermosyphon, it's all about efficiency. So far I'm not intending to modify the discharge, but I haven't seen anything on the 320.
RANGER1
19-02-2010, 09:08 AM
Whats t/syphon got to do with Vi ?
salamander
20-02-2010, 06:38 AM
I'm not sure about the math, but I know we're saving $. I've recently moved from process to NH3. Enjoy the papas fritas.
RANGER1
20-02-2010, 11:08 AM
So what type of oil cooling did you have before t/syhpon ?