View Full Version : I need to find the airflow of a fan.
spurs6160
09-02-2010, 10:33 AM
All I have is Model No. QC500-6 (Serial No. M805/1050). It is a single phase fan with a 0.736 kW motor and the rpm is 925. There is nothing else on the plate (the comm engineer coveniently left the "m3/s" section blank!!). I have googled the model number to no avail. Any ideas please (I am not on site to physically measure it)?
Brian_UK
09-02-2010, 07:23 PM
You've given a model number but no makers details.
Searching the web gives me a turbojet for a Boeing 737 which I think is a bit bigger than yours.
If the system has been commissioned then there should be some result reports somewhere.
Any fan details would only cover a range of airflow rates against the available pressure.
spurs6160
10-02-2010, 04:04 PM
Unfortunately I don't have manufacturer either - just got a text photo of the plate from an engineer on site with all the info I posted.
I want to size up a 14 kW coil but not sure if existing fan is man enough - I guess my only option is to go to site and measure airflow.
I was just hoping model number might trigger someone's memory as to manufacturer and I could then call them.
Thanks for trying.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.