rajeshsam
11-01-2010, 09:29 PM
We had installed a VRV System for a building. Every thing is working fine.
We had used an 8 Core wire of 0.24mm for the control wiring. We used 4 cores together which makes the thickness 0.24 x 4= 0.96mm which is above the prescribed Daikin thickness.
Now the agent of Daikin is asking us to change the wiring to 2 cores with 0.7mm thick. They say our 8 core wiring will create problem in the future.
As far as my understanding goes there will not be any problem as this is transmitting low voltage signal. We tried with even single core wire of 0.24 thicknesses & the unit still functions fine. Kindly advise if there is any problem if we use o.24mm thick wire.
We had used an 8 Core wire of 0.24mm for the control wiring. We used 4 cores together which makes the thickness 0.24 x 4= 0.96mm which is above the prescribed Daikin thickness.
Now the agent of Daikin is asking us to change the wiring to 2 cores with 0.7mm thick. They say our 8 core wiring will create problem in the future.
As far as my understanding goes there will not be any problem as this is transmitting low voltage signal. We tried with even single core wire of 0.24 thicknesses & the unit still functions fine. Kindly advise if there is any problem if we use o.24mm thick wire.