PDA

View Full Version : Airwell Ducted System Fault Help



Radlam
04-01-2010, 11:30 AM
Hi All,

I have just moved to Australia and our Aircon in the house is playing up. Its a ducted system, not sure on the model numbers as we can't get into the ceiling to check.

It has the RC4 remote, and when you switch it to cooling mode, the operation light just flashes. Even if you don't switch it on, the operation light starts flashing.

If you put it onto heating mode, the heating light illuminates on the receiver, and the operation light stays on but the outdoor unit doesnt run. this could be however because its way above the max 30 degrees in here!

Any ideas?

Radlam
04-01-2010, 12:42 PM
Fixed it,

It was the float switch holding the unit off cooling.