View Full Version : Mitsubishi Mnet transmission cable question
Gaowa
16-12-2009, 10:26 AM
I would like to ask, can I use control cable -Belden 8760 to connect between outdoor unit and Mnet?
Thermatech
16-12-2009, 05:51 PM
No
Cable size is too small at 0.8mm.
Mitsubishi specification is 2 core screen 1.25mm.
In UK this is non standard size so we use 1.5mm.
If you use smaller section cable you can get all sorts of communication problems & end up replacing it all with the correct type cable.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.