moondawn
10-12-2009, 11:05 PM
Hi Guys,
Am after some information to help me if we get the go ahead.
I have a daikin indoor unit FAYP100BV1( Wall Mount) which is in a kitchen, to cut a log story short the remote controller(hard wired) needs moving 12mtrs to the otherside of the kitchen.
Once moved we would like to have the remote sensing the return air instead of at the wall mount.
Remote Model No Is BRC1D52
I know on mitsi equipment this is done by the flick off a dip switch and a remote symbol with a thermometer appears at the remote.
Could someone enlighten me how its done this will be night time job due to live kitchen so be handy to know before i go to site
thanks in advance
lee
Am after some information to help me if we get the go ahead.
I have a daikin indoor unit FAYP100BV1( Wall Mount) which is in a kitchen, to cut a log story short the remote controller(hard wired) needs moving 12mtrs to the otherside of the kitchen.
Once moved we would like to have the remote sensing the return air instead of at the wall mount.
Remote Model No Is BRC1D52
I know on mitsi equipment this is done by the flick off a dip switch and a remote symbol with a thermometer appears at the remote.
Could someone enlighten me how its done this will be night time job due to live kitchen so be handy to know before i go to site
thanks in advance
lee