View Full Version : gear benders

03-12-2009, 10:13 PM
3/4'' and 7/8'' benders where has em in stock
or what do u se to bend the above size pipe, hard drawn

04-12-2009, 03:20 AM
Hi refaircon.
Check with local hydraulic fit out company, they use small electric benders for their seamless s/s pipe, long radius bends. But check the hard drawn copper pipe spec's., the re-cycled stuff is not bend freindly. Use the half hard grade.

monkey spanners
04-12-2009, 02:53 PM
I've got some imperial eastman gearbenders for 7/8" which we got from RPW, but most wholesalers should be able to get them. Shop around as prices range, i think we paid around 200 for them.
I also have a set of REMS hand benders for 5/8" 3/4" and 7/8" which are very good but hard work with 7/8" which i got from pipeline centre.

Rothenberger make a cheap set of hand benders which are ok but i don't like the quality of the 3/4" bends it makes.

04-12-2009, 10:35 PM
i've got ite hydraulic benders. they bend soft and hard up to 7/8 an absolute god send. bye bye springs and scoles :.)