View Full Version : toshiba vrv p c b problems
roger the chill
28-11-2009, 10:18 PM
Been to a toshiba MAR-F-105 HT M8-PE found it with condencer fan running in high speed. no display on p c b and no fault codes on controler. toshiba tech support sed p c b was faulty due to power supply, checked out ok.so fitted new p c b and transformer just to be safe. ran ok for one week yes you gest it the new p c b is us have checked all the bits conected to it.can you help
superswill
29-11-2009, 09:50 AM
check for water marks on the main PCB near the black chip in the center on the PCB, when going on defrost we had a lot of these with water entering the electrics as water was dripping on the coil (bottom left hand side) and had to re-lag the valves/pipes
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.