PDA

View Full Version : Absorption/Adsorption Chiller Utilizing Waste Heat







thetrialboy
27-11-2009, 06:50 PM
Dear All,

I'd like to ask if someone has experience with absorption/adsorption chillers utilizing industrial waste heat. The source is hot air and waste gases from industrial furnaces at 125C (not very high).

The question is what refrigerant and adsorbent/absorbent can work with this heat source at this temperature. Also if anyone has experience with any manufacturers they can share their impressions and recommendations.

I will appreciate every comment or experience on this topic.

Cheers,
Rumen

IceMan_4000
04-12-2009, 04:04 PM
*Cation shameless company plug below*:D

Do you mean 125F?

because if you mean 125C that is high enough for both Ad and Absorption.

if you are talking about 125F you will not get much performance out of an adsorption system.

This could work for Adsorption, which is the big benefit of this technology greater performance at lower source temp.

Since you are in china you could try contacting one of our China offices

I do not know of anyone else currently developing an Adsorption chiller.



CHINA

http://www.mayekawa.com/shared/img/icon_02.pngMAYEKAWA CHINA INDUSTRIES CO., LTD.http://www.mayekawa.com/shared/img/icon_07.png (http://www.mayekawachina.com.cn/)

SHANGHAI

ROOM 705, WISE LOGIC INTERNATIONAL CENTER, NO.66 NORTH SHANXI RD., SHANGHAI 200041, CHINA


TEL(86)21-5116-8958
FAX(86)21-5116-8928



QINGDAO

QINGDAO OFFICE

ROOM 503 FULIN BUILDING NO87 SOUTH FUZHOU ROAD SOUTH DISTRICT, QINGDAO CITY 266071, CHINA


TEL(86)532-8602-6169
FAX(86)532-8602-6269



MAYEKAWA MFG. CO., LTD. (CHINA)

BEIJING

BEIJING LIAISON OFFICE

NO.7B22 HANWEI PLAZA, NO.7 GUANGHUA ROAD,CHAOYANG DISTRICT, BEIJING 100004, P.R.CHINA


TEL(86)10-6561-7811
FAX(86)10-6561-1997