View Full Version : how to reset maintenance hours to V500 R134-A
incar
20-11-2009, 10:52 AM
hELLO,
HOW to reset maintenance hourS to V500 R134-A with controller??
thanks
hanif
20-11-2009, 11:52 AM
its bad practice unless the system locked out.
incar
26-11-2009, 02:44 AM
its bad practice unless the system locked out.
I did the maintenance (filter, oil, gas,belts.....) and now I would remove the key from the command, how can I do?
Hi incar,
I understand that you want to get rid of the tool-symbol from the screen? If yes, then try:
- Standard display =>Press and hold ENTER and DOWN ARROW key for 3 seconds to enter Intallation menu.
- Press DOWN ARROW key until you reach "HC"-display
HC is Hours counter for maintenance. Programming choice is 1000-5000 hours, setting is in tens of hours (ie. 100-500). In my understanding you cannot disable this, but you can set it to 500, which means next maintenance reminder occurs after 5000 running hours.
Hope this helps
-nova-
incar
27-11-2009, 02:54 PM
hi nova,
special thanks. I try this. special thanks
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.