G-50 Protocol

[Aritz]

Hi there!

I´m new here, I would like introduce myslef.
I´m from Spain. Computer Engineer working as System integrator.

Right, .... so, HELLO PEOPLE! :)

I am looking for info about Mitsubishi G-50 controller.
I have to integrate it, and I am wondering what protocol used it. It has a M-BUS side, that I don´t care, but I have to control it through RS232 or Ethernet (as first option)
Do you have some experience on it? Maybe someone knows what protocol it uses, or even better you could have its data sheet as well as its protocol specification.


Thanks in advance!!!!

P.D. You can either contact me here or my email is jareal@zignux.com

[Thermatech]

If you look on the Mitsubishi UK web site you will see that mitsubishi have mainy products to interface G50 or the newer model AG150 to just about any BMS system.

Modbus interface via ethernet connection.
Trend / synapsys, Cylon, Satchwell, Crestron, Invensys, Interactive Homes, North BT, Andover, Siemens.

BACnet interface via ethernet connection.
Andover Controls, York BMS, Seimens, Priva, Delta controls

LMAP / Echelon LonWorks interface via direct Mnet connection.
Honeywell, Johnson Controls, Realtime control systems, Smart controls

Mitsubishi TG2000 stand alone PC software pakage via ethernet connection.

[Aritz]

I need to integrate it with TREND on my own.

Is G-50 able to be interfaces through MODBUS?

[Thermatech]

Mitsubishi provide an off the self solution for TREND interface so that you do not have to do it yourself.

[Aritz]

Come on, I know it already exists, but my client wants I´ll do it for him, and he will pay me for that. It is my job. ok?

ByE