PDA

View Full Version : Lae smd34


mcunliffe4
19-10-2009, 07:22 PM
hI GUYS, WAS WANDERING DOES ANYONE KNOW HOW TO TAKE THE CLEAN OF THE THE DISPLAY, MANY THANKS FOR ANY HELP WITH THIS
Brian_UK
19-10-2009, 10:51 PM
Sorry, I don't understand your question.
mcunliffe4
19-10-2009, 10:55 PM
the contoller is displaying CLN when turned on, I presume this is a Clean Cond Alarm, sorry for the confusion Brian
Brian_UK
19-10-2009, 11:32 PM
That's OK, not a problem, just me being dense ;)

Anyway,,,, download the instructions for the SSD90 controller that is feeding your SMD34 display from the link below.

Find paragraph 8.3 which is about your alarm and somewhere else in there you will find how to reset it.

http://www.hawco.co.uk/UserFiles/Products/Files/SSD90CEngIns-version-22.pdf
mcunliffe4
20-10-2009, 07:43 AM
Thanks alot Brian, will check out the link now.