View Full Version : Bremma ice maker no water
stuart73
18-09-2009, 02:06 PM
i have an brema CB425A ice maker and pump is running dry i have replaced inlet valve but still no water is entering ice machine compressor is running also, step controler seems to be working fine,if i manualy fill machine works fine any suggestions?
Northdude
18-09-2009, 03:52 PM
Have you checked that inlet valve is opening, ie does it have power?
dunny123
20-09-2009, 08:02 PM
Ball valve/washing machine valve not working,or blocked.disconnect hose from back of machine,are you getting water there when you turn the valve on?if no then it wants replacing.
chemi-cool
20-09-2009, 08:20 PM
Start from the main water valve and check every component on the way.
sean1
20-09-2009, 10:17 PM
put timer into harvest and check if you have power to the inlet vale
Magoo
21-09-2009, 12:37 AM
As per chemi-cool start at the water supply valve on the wall and prove the water supply, some have pre filters that block-up, and solenoid valves that coils fail on, you proved it works in manually filled with water.
magoo
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.