gwapa
13-09-2009, 01:44 PM
Dear Friends
The following statement was taken from Carlyle compressor selection software.
Design Return Gas Temperature (RGT): A data field for entering the design RGT for the refrigeration system. This temperature is generally selected as 25 ºFdegrees for Low Temperature applications and 40 ºFdegrees for Medium Temperature applications but may be any temperature equal to or greater than the SST (Saturated Suction Temperature) and less than or equal to 65F (65F is the default).
It is a very wide criterio ¿ Could somebody make this criterio narrow?
If I have -35ºC SST/ Condensing at +40ºC and using screw compressor,subcooling and economizer, which RTG should I select?
I appreciate your very kind comments
Best regards
Gwapa
The following statement was taken from Carlyle compressor selection software.
Design Return Gas Temperature (RGT): A data field for entering the design RGT for the refrigeration system. This temperature is generally selected as 25 ºFdegrees for Low Temperature applications and 40 ºFdegrees for Medium Temperature applications but may be any temperature equal to or greater than the SST (Saturated Suction Temperature) and less than or equal to 65F (65F is the default).
It is a very wide criterio ¿ Could somebody make this criterio narrow?
If I have -35ºC SST/ Condensing at +40ºC and using screw compressor,subcooling and economizer, which RTG should I select?
I appreciate your very kind comments
Best regards
Gwapa