deetooarruk
06-09-2009, 09:31 AM
Hi everyone!
Just wanna take this opertunity to say hi and tell you a bit about myself!
I currently work for a controls/front-end company in the UK. Previous, I worked in Control Panel Assembly and Site Installations, for 3 years.
More to the point, I'm trained in the art of controls.
I've worked on experimental refrigeration systems, such as a CO2>R404A heat exchange for a big UK supermarket chain, sent to Northern Ireland for trial run, large-scale screw pack applications for Dubai and Jordan, and much more.
Familiar with: Radford UPC97/PC-1000, CPC PAK+, Danfoss-IP, RDM, ELM/Honeywell Pack Controllers.
So, If you need any help with the electrical/electronic controls side of refrigeration, just drop me a line.
Although, I will be browsing forums at the same time!
- deetooarruk
PS: I suck at the gas side of this.
Just wanna take this opertunity to say hi and tell you a bit about myself!
I currently work for a controls/front-end company in the UK. Previous, I worked in Control Panel Assembly and Site Installations, for 3 years.
More to the point, I'm trained in the art of controls.
I've worked on experimental refrigeration systems, such as a CO2>R404A heat exchange for a big UK supermarket chain, sent to Northern Ireland for trial run, large-scale screw pack applications for Dubai and Jordan, and much more.
Familiar with: Radford UPC97/PC-1000, CPC PAK+, Danfoss-IP, RDM, ELM/Honeywell Pack Controllers.
So, If you need any help with the electrical/electronic controls side of refrigeration, just drop me a line.
Although, I will be browsing forums at the same time!
- deetooarruk
PS: I suck at the gas side of this.