PDA

View Full Version : NEED HELP WITH A BEKO Model CDA 543F



tansie
13-08-2009, 06:13 PM
Hi,
I have a lot of ice build up in the fridge, I put the automatic defrost to No. 1 as the manual says but nothing is happening and that was a few days ago, any help please

Ashkhan
13-08-2009, 10:21 PM
is the side by side type..american?

Ashkhan
13-08-2009, 10:22 PM
is it a side by side type..if not..where or what is iceing up?

Naami
14-08-2009, 09:04 PM
is it a build up on one side of the cold plate or evenly across it?
have you checked the door seals?

xamtex
21-08-2009, 06:10 PM
what a peice of junk!!.......my daughters just stopped working....after much prodding with a meter it turns out the wiring between the stat and motor is open curcuit....the black wire from stat to compressor.
ok you might think...plug at top....plug at bottom...open it up and rewire...??..NOOOOOO.........the whole thing is built as a shell...wired and then injected with expanding foam......in reality this wiring fault = a new machine...its a writeoff....not repairable.
i have opened it up with a stanley knife and intend to rewire and refoam it....just 18 months old...junk...:mad: