PDA

View Full Version : Service valves



airconlad
11-08-2009, 06:04 PM
Hi

Does anyone know out there where I can source a few of these type valves from ?

It uses the standard 1/4 inch flare screw on charge hose fitment and brazes onto 1/4 inch copper pipe.

Need a few to finnish my refrigeration cooled PC

Thanks

acnerd
11-08-2009, 07:29 PM
I call them 1/4" schrader valve stubs. They are an off the shelf item at any refrigeration supplier in the country:

Climate Centre
HRP
Dean & Wood
to name a few.

superswill
11-08-2009, 08:00 PM
also see

http://www.hrponline.co.uk/hrp/FindUs.jsp

http://www.dean-wood.co.uk/?id=34

http://www.climatecenter.co.uk/climt/index.html

http://www.rpw.co.uk/

airconlad
11-08-2009, 10:06 PM
Hi

Thanks for the info it’s greatly appreciated, will have a look at those online now.

For the life of me I could not find them on the internet, used various keywords from air conditioning service valve to brass refrigerant charge valve and nothing but the brass plumbing type came up, did find a company who make the 2 found on split system condenser units, that’s as far as I got.

The one I have came from our old Candy fridge freezer that went down tip after the old dear decided to defrost the freezer part with a knife & fork then hisssssssssss, oh buxxer !:eek:

Thanks again

airconlad