tonyh
09-08-2009, 06:44 PM
Hi am on a site at the moment were new company has took on offices all equipment is R22 mitsi electric mixture of splits, multi-split & VRf installed about 10yr ago and probably not servced for a good many years, i have got ducts missing, remotes missing and daisy chains broken. One of the offices with 11 indoor units ran from single slits & multi's i had running bar one cassette which was not connected to a remote - missing so I wired it on to the daisy chain of the system i thought it was on, I got a P3 error on the remote then remote went blank no power to it.
I put everything back the way it was before turned off the mains and powered up again but still nothing to the remote.
Has anyone got an idea of what I have blown is it the remote itself or have I blown something on the slave unit. contoller is a PAR-JH240KA
Many Thanks for any help in advance.
I put everything back the way it was before turned off the mains and powered up again but still nothing to the remote.
Has anyone got an idea of what I have blown is it the remote itself or have I blown something on the slave unit. contoller is a PAR-JH240KA
Many Thanks for any help in advance.