Daikin:outdoor-air processing unit

[thuydsc]

Hi members
I have a problem.My place have a 1 outdoor-air processing:
- it run normal
- don't stop it because display in remote symbol:"under centralized control"
- it no connect with central remote controller,i-touch....

anyone helf me remove symbol:"under centralized control"

[sedgy]

thuydsc,
please give us a clue, fugitsyu, mitsubitshi, daikin,?

[acnerd]

If he's talking i-touch, it must be Daikin?

You need to give us more info, not only manufacturer, but what sort of unit it is. Plain split, twin-split, multi-split or VRV.

[airefresco]

There´s a clue in the tittle :)

[sedgy]

yes I see the tittle, have you got spell check?
------

[acnerd]

There´s a clue in the tittle :)

Talk about missing the obvious!! :o

[airefresco]

yes I see the tittle, have you got spell check?
------

It´s just you asked what make it was and it clearly states Daikin in the tittle. What do I need a spell checker for? :confused:

[sedgy]

It just tittled my title

[airefresco]

With you now :)

[brunstar]

if you have an under centralised control symbol up on the screen you may find that you have some other type of thermostat or KRP board connected to the unit.
the other thing it could be is a multiple indoor 2 pipe system, if this was the case you should be able to turn it off with the switch at the top.
I feel as though maybe you have some sort of external timer or thermostat or the system is not set up properly.

[Clk320_Greg]

You need to have a look round the indoor PCB for extrenal controls andl also on the Forced off terminals for some sort of over ride device! - If its an old system then before the days of timed controlers they used to fit time clocks onto the forced off to enable a timed useage of the system!

Like has been said look for KRP boards - ******* stupid little bords!