PDA

View Full Version : Lets do a Frick forum!







Frickman
29-07-2009, 08:59 AM
:rolleyes:We can cover all ranges of compressor's, Quantum LX's Quantum 4's Vyper drives or any other VSD that you can put on screw compressors.

TXiceman
29-07-2009, 05:55 PM
I personally am not a fan of specific manufacturers forums. It is better to keep it open. You can always start a Specific thread for a model in question.

Ken

Grizzly
29-07-2009, 07:20 PM
I personally am not a fan of specific manufacturers forums. It is better to keep it open. You can always start a Specific thread for a model in question.

Ken

Sorry Frickman.
But I agree with the Iceman.
It's not advantageous for anyone to show allegiance to any manufacturer!

But that does not mean that your specific advise would not be welcomed.
It would, like any of the many "specialists" that help us all.
What I rather crudely am trying to say is!
We all benefit from each others knowledge and experience.
But if we were to take sides it would ruin a brilliant forum.
Hope to here from you often.
Grizzly;)

Magoo
30-07-2009, 03:17 AM
So there go Frickman, back in your cage.
But I do quite like Frick compressors, built like brick out-house. Some of the earlier control panels were seriously low tech and a head ache.

Frickman
30-07-2009, 10:15 PM
I was just sugesting that come here for your problems for frick compressors thats it. I agree that you should keep it open and not favor manufacturer.

Grizzly
31-07-2009, 05:39 PM
I was just sugesting that come here for your problems for frick compressors thats it. I agree that you should keep it open and not favor manufacturer.

Good Man!
I will know where to come in future.
Thanks Grizzly.

Josip
03-08-2009, 12:16 PM
Hi, Frickman :)

agree with Grizzly... you're our man, now we know where to come if need something .... ;)

Best regards, Josip :)

nh3wizard
03-08-2009, 06:28 PM
I used to be a big Frick fan, but that has changed drastically over the last 10 years, all compressors have their good points and bad points, find me a good operator and isnt doesnt matter what type equipment you run, the operator is the key.

Grizzly
03-08-2009, 09:17 PM
I used to be a big Frick fan, but that has changed drastically over the last 10 years, all compressors have their good points and bad points, find me a good operator and isnt doesnt matter what type equipment you run, the operator is the key.

Wise words yet again!
Grizzly

Frickman
04-08-2009, 03:48 AM
That is true

US Iceman
05-08-2009, 12:51 AM
We can cover all ranges of compressor's, Quantum LX's Quantum 4's Vyper drives or any other VSD that you can put on screw compressors.


Nope.

Separate threads started by someone sometimes ask for literature, etc. In that regard you could be an asset to them. Or, if you have general questions then please post them and someone different may be able to help you.

The forums will not be turned into an advertising display for any manufacturer. No one else is extended this luxury either. So that's fair for everyone.;)

Tung
12-08-2009, 05:29 PM
It will be a wonderful idea for me, because I deal with Frick product everyday.
so, why not!

nh3wizard
13-08-2009, 07:15 PM
It will be a wonderful idea for me, because I deal with Frick product everyday.
so, why not!

Never mind, I had something negative to say but Ill leave it alone...

kiwireeferman
15-08-2009, 06:59 AM
Could we call it Fricks I have known.:p

oubruiser
16-08-2009, 01:55 PM
New to this.. My problem is with a Frick compressor..what would cause the compressor to freeze up when loaded..

Grizzly
16-08-2009, 02:02 PM
New to this.. My problem is with a Frick compressor..what would cause the compressor to freeze up when loaded..


Welcome oubruiser.
We generally like a bit more info!
As a first un-informed guess, how about liquid flood-back?
Grizzly

nike123
16-08-2009, 02:44 PM
New to this.. My problem is with a Frick compressor..what would cause the compressor to freeze up when loaded..

Part of compressor casing temperature lower than 0C. That doesn't necessary mean that there is problem.
What is evaporation temperature and what is suction superheat?
And please, post your question in appropriate section.
This has nothing to do with "Do you have a suggestion for the RE Forums?".

ColdDeath
20-08-2009, 08:20 PM
Never mind, I had something negative to say but Ill leave it alone...
Take it that you are not high on the Frick.

Tymmegreereiz
23-03-2010, 09:43 PM
I think this forum isnt anywhere near as fun now. I mean, we can no longer use it to bash the mods and heckle the administrators.This forum is now lame.Lets bring back the old style one please? :-/