eliwell controller problems

[Northdude]

I have an eliwell controller ID COOL series, problem is on the 240v supply in to the controller i am getting 240v out of the neutral, controller works but puts 240v accross all neutrals on the cabinet disabling compressor etc, controller is brand new, anyone else had similar problems :mad:

[Grizzly]

Hi Northdude.
Have you tried swapping Terminals 6 and 7 over?
Grizzly

[Frosty]

Sounds like you've got a broken neutral. Work backwards from the neutral at the power supply until you find the break - its probably a loose connection somewhere.

[Northdude]

yes tried swapping them over and still getting live down neutral. I disconnected my neutral off the controller so all i had was the live in, i tested the neutral terminal on the back of the controller and it had 240v on it so it must be the controller. Just seems strange

[chillyblue]

you've lost your neutral mate.

[Grizzly]

I agree with Frosty and Chillyblue.
I suspect they are correct.
Good luck and plesae let us know how you get on.
Grizzly

[Eeram]

You have a floating neutral. Try to find a fixed neutral point and connect all your neutral wiring to this point.

[lowcool]

does the display light up?