PDA

View Full Version : Testing pressure and checking for leaks



grindrx
21-07-2009, 07:56 PM
I have a chigo 12000btu mini split ac unit which flashes e4 after running for about 30minutes. After looking at their site and reading the minimal information available for this unit on the web, I believe it has to be a pressure problem.

My question is this: what tool would I need to check the pressure of this unit, and where would be a cheap place to grab one.

It needs to be 410a/2. 54lbs

Also what is the best way to check for leaks?

Thank you and help and input would be greatly appreciated.

philfridge
21-07-2009, 08:14 PM
You should have a refrigerant handling certificate before you attempt to do this .

Tony
21-07-2009, 08:17 PM
Hi philfridge


You should have a refrigerant handling certificate before you attempt to do this

In UK you do - but he's in Mexico

grindrx
21-07-2009, 08:34 PM
I installed the unit myself, and feel as if I'm capable enough as long as I have the correct tools. Also I have re-charged the my ac in my car without considering myself a mechanic. Anyhow would the gauges I used on my car be the same, or are they a different size?

Peter_1
22-07-2009, 07:04 AM
You need other hoses or adapters because your car is 1/4 SAE and R410a is 5/16 SAE.