PDA

View Full Version : Help with small Heat Exchanger



tnova
15-07-2009, 02:16 PM
Hi all, Im new to refirgeration cycles and have to build one for work.

I am using an Aspen 1.4 cc compressor running at 6000 RPM using R134a with a total heat rejection of 425 W. I am having difficulties finding a condenser and evaporator small enough for my system. Any recommendations???

I also need to size capillary tubes for this as well. I have read that Danfoss has a program. Is the program translatable to other compressor systems?