View Full Version : Vilter selection
fullmatty
14-07-2009, 05:18 PM
I have a couple of 458 XL's and was wondering if anyone can run me a selection for them at two conditions?
I require Tonnage and BHP
Ammonia
1150 RPM
15 PSIG
140 PSIG
15 PSIG
170 PSIG
IceMan_4000
21-07-2009, 09:58 PM
I wish I could help you fullmatty
I do not have the Vilter software any more so I can not give you the exact info you need. Maybe someone on the board here with the Vilter selection program will come along and fill in the blanks I leave.
On my compressor cheat sheet I have the 458XL listed as follows
1200RPM 24psig suction and 167 Discharge
this gives you 398CFM 100.7TR at 130.9 brake horsepower.
I know this does not really help with your direct conditions.
anyone with Vilter software out there do a selection on these compressors?
marley
22-08-2009, 07:09 AM
roughly one h.p equals one ton of refrigeration,bhp not to sure. I hope this helped.
Toosh
23-08-2009, 07:39 AM
Hi, Goto WWW.vilter.com they have selection software free but i don`t know if its for compressor selection its worth a look. JH lock used to be the distributers I worked for them in calagary in the 70`. I now see its Pace
Good Luck Toosh
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.