PDA

View Full Version : over capacitance



Richvacr
11-07-2009, 02:10 AM
I have a walk in freezer with a start capacitor 145-175 but with my meter I get upto 300mf. Thought me meter was headed for recycling but I check a few new capacitors and it was always right. Went back and had the same reading and then cut off the resistor and the reading was 195-200.

Does any one know what is going on?

Oh I replace the capacitor with a new one which my meter reads correct.

Brian_UK
11-07-2009, 11:28 PM
A resistor is not a capacitor hence the unusual readings.

yoelyeve
12-07-2009, 01:52 AM
The Resister is there to bled the cap. so you don't have a problem if compressor short cycles