tony1
26-06-2009, 10:15 PM
hi! everyone.
Im creating a new instalation on a salad bar refrigerator with 2-3 doors underneath and the evaporator is in the door section. Now the compressor unit is 1/2 hp and its going to be installed in the outdoors and its going to be elevated above the evaporator oprox. 10ft or 3m. Now what im concerned about is where should the p trap for the oil should be as the piping is going to be traveling 2.5m horozontaly coming out of the evaporator and then shoot straight up for 2 to 2.5m high, go out and be gadually elevating for another meter maby less. Any suggestions would be gateful. Thanks!
Im creating a new instalation on a salad bar refrigerator with 2-3 doors underneath and the evaporator is in the door section. Now the compressor unit is 1/2 hp and its going to be installed in the outdoors and its going to be elevated above the evaporator oprox. 10ft or 3m. Now what im concerned about is where should the p trap for the oil should be as the piping is going to be traveling 2.5m horozontaly coming out of the evaporator and then shoot straight up for 2 to 2.5m high, go out and be gadually elevating for another meter maby less. Any suggestions would be gateful. Thanks!