PDA

View Full Version : The so thin evaporator pipe



James priyono
18-06-2009, 12:58 PM
Why the split A/C output now the pipe evaporator is so thin?
So that the process of the fast refrigeration is implemented?

Tesla
19-06-2009, 01:15 AM
Hi James
You're looking young these days. Yes the thinner the copper tube is the faster heat will transfer, and smaller diameter means you can fit more tubes increasing the surface area which also increases heat transfer. But there are limmits. I digres here, the coke can measures about 1/2 diameter to 1 length this ratio gives maximum volume for minimum surface area for a cylender, all to save on material.

James priyono
19-06-2009, 02:08 AM
Not with the thin evaporator will make the evaporator become fast leaked?
Because when the split A/C did not operate will dismiss the high pressure and that made the evaporator become fast leaked.